FAAC DOMO
Manager's
Note: "We are constantly on the lookout for quality inexpensive gate
operators for the DIYer and the DOMO Swing represents the best compromise
between top quality and price with the DIYer in mind". We recommend
this product for Light Wood,
Light Steel, Aluminum, Vinyl, Chain Link gates 500lbs or to 14 feet.
This is the exact same operator advertised under other brand names for more.
Also take a look at the Chamberlain LA400. 
DOMO Swing gate openers are designed to be easy to install for the average
handyman. Every unit comes standard with everything needed to automate
your gate, including hardware.
The new DOMO Swing line of swing gate operators bring the guarantee of
quality and reliability to an innovative 12 VDC residential gate operator.
We buy direct from the manufacturer and pass the savings on to you.
WHEN BUYING A GATE OPERATOR
MAKE SURE IT IS ACTUALLY UL325 CERTIFIED FOR YOUR SAFETY AND TO PASS YOUR
LOCAL BUILDING DEPT. REQUIREMENTS. BEWARE OF PRODUCTS THAT STATE THEIR
PRODUCT MEETS UL325 STANDARDS, THE PRODUCT MUST BE CERTIFIED BY
UNDERWRITERS LABORATORIES TO BE ACCEPTABLE TO LOCAL BUILDING INSPECTORS-
DON'T SETTLE FOR LESS!
Please review the DOMO Manual before purchase.
DOMO
MANUAL
| Sentry Swing |
List Price |
Internet
Price |
| DOMO Swing- 12V
Battery, Operator arm with power cable, Control Board, Manual
Release Key, Receiver, one Transmitter, 18V Transformer,
Mounting Hardware |
$869.00 |
$469.00 |
 |
| DOMO Swing2- 12V
Battery, Two Operator arm with power cable, Control Board, Manual
Release Key, Receiver, one Transmitter, 18V Transformer,
Mounting Hardware |
$1149.00 |
$649.00 |
|
 All
FAAC Products are built to the highest standards worldwide. Each unit is
put through rigorous quality control testing on each component, which are
all made and assembled in one factory. The manufacturer is the
largest (number one in sales and reputation) in the WORLD and meets or
exceeds ISO 9000 regulations, which requires testing on 100% of the
products being produced and exceeds UL325 standards for anti-crushing
safety.
|
Opening/Closing
Soft Stop
This built in control board feature
learns your designated opening and closing points for
the swing of your swinging gate. This
also allows the gate operator to
automatically slow the motion of the gate to a
smooth secure stop.
Advanced
Drive System
The
Sentry Swing uses a planetary gear system cutting down on bearing wear
and motor wear and tear.
This well
thought-out drive system is essential to the reliability, and life of
your unit.
Programming
Ease
The Sentry
Swing has a one button programming function so that you can begin
using your operator right away. The
control board adjusts to the most efficient opening and closing
timing.
Resistance
External
Elements
The Sentry Swing arm has an aluminum body that has been powder-coated.
This well thought-out design resists dirt and dust from
entering into the unit and is able to withstand very cold or very hot
temperatures with trouble free operation due to temperature extremes.
Safety
– The Sentry Swing is
UL 325 listed which means it will automatically reverse directions
when it comes in contact with an obstruction.
All safety devices must be installed to be in UL 325
compliance. The Photoeyes plug into the control panel with ease.
Each
Kit comes with:
Manual Release Key, Battery
Back-up, additional output terminals to add accessories, Quick Plug
receiver, two transmitters.
Upswung
Corp. recommends having appropriate safety sensors installed.
The Sentry Swing can also be used in conjunction with exit
sensors, magnetic and solenoid locks, safety sensors, intercoms,
digital keypads, and much more. Call
for accessories information.
|
|
